Lite Steam-A-Seam has a pressure sensitive adhesive that allows for a temporary hold to your materials. There is no pressing until your entire appliqué is in place.

How to use
*Trace appliqué design in reverse on paper liner and remove the second liner. (Check to see which liner removes first by peeling apart at the corner. Trace on the liner still attached to the web.) Skip tracing if you are not using a pattern.

Stick Steam-A-Seam 2 to the wrong side of the appliqué material.

*Cut Steam-A-Seam 2 and material together along traced lines.

*Peel off remaining paper liner (leaving the web on the fabric) and stick appliqué to second material. Reposition as desired.

*Press for 10-15 seconds for cotton fabric (longer with a press cloth). Adjust temperature and pressing time to suit your fabric. Repeat, slightly overlapping pressed areas until complete.

Machine wash and dry at low heat or dry-clean.